Stormwater

We can supply stainless orifice plates to suit your requirements Our typical orifice plate is 3mm thick and is 400mm x 400mm in size and has 4 holes to anchor into position. Any hole size can be ordered. Plate Material : 304 Stainless Steel Available Thickness: 3mm 6mm Available Sizes: 200 x 200 250 x […]

The Enviropod200™ is the leading stormwater gullypit basket in Australia, with over 20,000 installs nationwide. Improvements over the last two decades have made the design easier for the contractor while still providing the same level of pollutant removal. EASY – Easy to source, ship and handle EASY INSTALLATION – With fewer parts and a lighter […]

• Stormwater Aspros designed and manufactured to Council Specifications • Aspros cast with a 600mm hole for access to chamber below • Manufactured to suit 1050 – 2400 internal diameter chambers

• Elongated stormwater Aspros designed and manufactured to Council Specifications • Manufactured to suit 1050 – 1500 internal diameter chambers • Aspros cast with circular or noncircular openings • Custom elongated aspros available

• Non-circular opening Stormwater Aspros designed and manufactured to Council Specifications • Aspros cast with various hole sizes hole for drainage into chamber below • Designed for roof water drainage, with hole sizes 600×900, 900×600, 900×900 and 930×835 • Manufactured to suit 1050 – 1500 internal diameter chambers • Custom sizes available with RPEQ upon […]

Civilmart Small Box Culverts are designed and manufactured to AS1597.1 2010, conforming to VicRoads standards. Small Box Culverts are available as invert or crown culverts, and with base slabs and lids to suit. Standard nominal length for Small Box Culverts is 1200mm, however Civilmart are able to custom-manufacture Small Box Culverts to suit your specific […]

Civilmart Large Box Culverts are designed and manufactured to AS1597.2 2013, conforming to VicRoads standards. Large Box Culverts are also available with a base slab to suit. Standard nominal length for Large Box Culverts is 1200mm, however Civilmart are able to custom-manufacture Large Box Culverts to suit your specific needs. Contact your closest Civilmart specialist […]

BCP are able to custom-manufacture culverts to suit your specific job needs. Below are just a few examples of what we’re able to do.

• Base slabs are designed and manufactured to AS1597.1 • RMS Specification Link and Base Slabs are designed to RMS B80, RMS R16 and RMS R11 • TMR (QLD) Specification Link and Base Slabs are available on request • Standard fill height is 0-2m. Greater fill heights available on request • Concrete strength 50 MPa […]

• Link slabs are designed and manufactured to AS1597.1 • RMS Specification Link Slabs are designed to RMS B80, RMS R16 and RMS R11 • TMR (QLD) Specification Link Slabs are available on request • Standard fill height is 0-2m. Greater fill heights available on request • Concrete strength 50 MPa • Exposure Classifications of […]

• Link Slabs are designed and manufactured to AS1597.2 • RMS Specification Link Slabs are designed to RMS B80, RMS R16 and RMS R11. • TMR (QLD) Specification Link Slabs are available on re-quest • Standard fill height is 0-2m. Greater fill heights available on request • Concrete strength 50 MPa • Exposure Classifications of […]

• Base Slabs are designed and manufactured to AS1597.2 • RMS Specification Base Slabs are designed to RMS B80, RMS R16 and RMS R11. • TMR (QLD) Specification Base Slabs are available on re-quest • Standard fill height is 0-2m. Greater fill heights available on request • Concrete strength 50 MPa • Exposure Classifications of […]

• Cast iron cover and frames manufactured to council specifications • Cast iron Cover and frames approved for use in SE QLD • Load Class to AS3996 • Supplied with cover and frame to suit in-situ installation on-site

• Brass & Stainless Edging available upon request • Up to Class G available • Ductile Iron Covers manufactured to AS3996, available in Class B, D and G • Ductile iron covers available in both solid top and infill

• Rebated chambers to suit all stormwater applications • All sizes from 1050 to 2400 diameter • RPEQ design upon request • Custom chambers also available, contact your local Civilmart Specialist for more information

• Custom concrete surrounds made for any application, RPEQ Certificate on request • IPWEAQ and V’ grates on request

• Galvanized Mild Steel grates manufactured to AS3996 load standards • Class A, B, C and D available • Off the shelf availability • Also available in non-slip heelgaurd • Grates are fully hinged to frame for easy opening for maintenance • Grates fitted with lockdown bolt for security once shut

• Galvanised Mild Steel trench grates made to AS3996 load standards available in Class B and D • Trench Grate Frame manufactured in two meter lengths, with two one meter grates in the frame for easy lifting and maintenance • Trench grate system fitted with lock down bolts for added security • Custom sizes available […]

• Galvanised Mild Steel Surcharge grates available to larger pit size openings from 600×600 to  200×1200 • Galvanised legs with pre drilled bolt holes for fastening to top slab • Manufactured with a hinge and lockdown bolts for easy maintenance and security • Suit all applications including subdivisions, bio basins and large volume surcharge areas […]

• Galvanised Mild Steel dome grates designed and manufactured to council specifications • Ideal for sub-divisional surcharge pits, bio-basin overflow pits, where high capacity intake is required • Hinged and lockable design for maintenance and security

• Galvanised Mild Steel Alternative Surcharge grates are designed and manufactured for a much simpler installation • Designed to bolt onto stormwater pit walls where a top slab is not available • Designed to minimise any in-situ concrete works on-site

• Based on drawings D-0050 & BSD 8091 • Type 1: Grate & Frame + Legs • Type 2: Grate & Frame • Manufactured to Council designs and specifications

• Galvanised Mild Steel self supporting grates are designed to drop into pit rebate • Fast installation designed to minimise in-situ works on-site • Available off the shelf to suit Class A and B loadings

• Self supporting Galvanised Mild Steel trench grate, designed to drop into drainage channel rebate • Trench grate designed to Class B loadings • Frame-less design to ensure fast installation to minimise in-situ works on-site

Our range of GRC Pits are available in sizes ranging from 300mm to 1200mm. Their lightweight durable design allows GRC Pits to be installed easily, in most cases without machinery. GRC Pits are suitable for use in areas prone to corrosion, with proven resistance to corrosion agents. Risers are also available in 150, 300 & […]

Galvanised Grates are available to suit 300mm to 900mm pits. Available to suit two traffic applications, our Galvanised Grates are designed to drop into the rebate and finish flush with the top edge of the rebate.

Chequerplate Covers are available to suit 300mm to 900mm pits. Available to suit two traffic applications, our Chequerplate Covers are designed to drop into the rebate and finish flush with the top edge of the rebate.

Concrete Covers are available to suit 300mm to 900mm pits. Available to suit two traffic applications, our Concrete Covers are designed to drop into the rebate and finish flush with the top edge of the rebate.

Small Triangular GRC Trash Screens are designed for 450 x 450 concrete pits only. Large Triangular GRC Trash Screens are designed for 600 x 600 concrete pits and above. Each Trash Screen includes a bracket for fixing the screen to the wall of the pit.

Each Trash Screen includes a bracket for fixing the screen to the wall of the pit.

Our Raw Grates meet Australian Standards, ensuring strong, trustworthy grates for all stormwater entries. Available in Class B & D, Raw Grates come with a non-slip finish to maximise safety. Save time and money on site with our off the shelf availability. Heelguard Grate & Covers are also available on request.

Our Encased Grates are AS3996 Compliant to Class B & D. Available in a range of sizes to suit every need, Encased Grates can also be custom-manufactured to your designs as required. Galvanised Trash Grates also available on request.

Our Infill Covers meet Australian Standards, ensuring a safe, protective cover for maintenance holes and pit entries. Available in Class B & D, Infill Covers have a non-slip finish to maximise safety. Save time and money on site with off the shelf availability of these Infill Covers.

Our Cast Iron Solid Covers meet Australian Standards, ensuring a safe, protective cover for maintenance holes and pit entries. Available in Class B & D, Cast Iron Solid Covers have a non-slip finish to maximise safety. Save time and money on site with off the shelf availability of these Cast Iron Solid Covers.

The Gap between the underside of the grate and concrete surface is approximately 110mm.

• The Grate & Frame is fully Hot Dipped Galvanised • Grate is HINGED and LOCKABLE (i.e. bolt down) • Grates are BICYCLE SAFE and comply with AS3996 • All units fitted with foot anchors for safe handling

• 900 x 500 Clear Opening • Fully Hot Dipped Galvanised Grate (Load Rated Class D) • Grate is HINGED and LOCKABLE (i.e. bolt down) • The Grate is “BICYCLE SAFE” and Complies with AS3996

Our sloping headwalls are designed and manufactured to local council requirements.

Our standard range of Pipe Headwalls  suit reinforced concrete pipes from 225mm to 1500mm diameter. Twin, triple and quadruple cell headwalls are also available for additional pipes. Our design conforms to state and council requirements, ensuring high-quality products and peace of mind knowing your project will stand the test of time. Civilmart are able to […]

Our standard range of Twin Cell Pipe Headwalls  suit reinforced concrete pipes from 225mm to 1500mm diameter. Triple and quadruple cell headwalls are also available for additional pipes. Our design conforms to state and council requirements, ensuring high-quality products and peace of mind knowing your project will stand the test of time. Civilmart are able […]

Our standard range of Box Culvert Headwalls suit Box Culverts from 300mm to 1200mm span. Our design conforms to state and council requirements and suits our entire range of precast box culverts. Twin, triple and quadruple cell headwalls are also available. Civilmart are also able to custom-manufacture Box Culvert Headwalls to suit your specific needs. […]

Our standard Driveable PipeHeadwalls range in size from from 225mm to 600mm diameter openings. Our designs conform to state and council requirements and are classified to SD1991A type 1. Driveable Pipe Headwalls are available with or without feet, and are available in multiple-cell configurations. Civilmart are also capable of custom-manufacturing headwalls to suit your design. […]

Our standard Driveable Box Culvert Headwalls range in size from from 300mm to 1200mm span openings. Our designs conform to state and council requirements and are classified to SD1991A type 1. Driveable Box Culvert Headwalls are available with or without feet, and are available in multiple-cell configurations. Civilmart are also capable of custom-manufacturing headwalls to […]

Our Mass Flat Headwalls are commonly used in local council projects. Built to suit pipes from 300mm up to 900mm diameter, our Civilmart Mass Flat Headwalls conform to VicRoads standards.

Most commonly used in domestic property, our Flat Headwalls are designed to suit pipes from 150mm up to 375mm diameter.

Special orders are available to suit our range of Pipes and Box Culverts. Contact your closest Civilmart specialist with your requirements for custom headwalls (design illustrations are required).

Special orders are available to suit our range of Pipes and Box Culverts. Contact your closest Civilmart specialist with your requirements for custom headwalls (design illustrations are required).

• These headwalls are made to order • Headwalls are designed for standard BCP culvert sizes • Headwalls are manufactured in accordance to AS3600 • Headwall dimensions and masses are available on request, please call BCP to discuss

• Designed to stop entry at pipe inlet/outlet • Simple and easy installation • Hot dipped galvanized steel for long life • Designed to fit most headwalls • Can be easily padlocked • Quick Release Handle to free a blockage

• Designed for use in areas where head-on collisions are likely to occur • Suits pipes 300 ,375 and 450 diameter

Junction boxes are available in single or double. The Standard S.E.P covers are manufactured from galvanised pressed steel frame with 8mm reinforced bar. All concrete filled S.E.Ps are filled with 32mpa concrete & non-slip brush finish. These are also available in ductile cast iron solid top light lift

Our Lintel & Grate Combinations meet specifications for: – Gold Coast City Council – Brisbane City Council – Logan City Council – IPWEAQ

• Large stock range
• Inserts and/or Surrounds are available separately
• Custom Pit surrounds available to suit council/shire requirements
• 400×400, 600×600, 720×460 inserts can be either concrete or galvanised grate

• Large stock range
• Inserts and/or Surrounds are available separately
• Custom Pit surrounds available to suit Shire requirements

Our standard stock of Knockout Pits range from 450mm to 1200mm. Available in all-solid or single-solid configurations, Civilmart Knockout pits are lightweight compared to our competitors. Rated to Class D, our pits come with versatile knockouts, while step irons can be pre-installed for easy access. Custom-built Knockout Pits are also available upon request.

Stacked Risers can be built up to the required pit height. Our range of Stacked Risers are available in 150mm, 300mm, 450mm, 600mm, 900mm & 1200mm heights. Our Stacked Risers feature a rebated system to fit on each pit perfectly. We stock a large range of Stacked Risers, providing consistent off-the-shelf availability.

• Build up to the height required with our segmental pit range • Available in 150, 300, 600 & 900 • Rebated system to fit on pit • Large stock range with off the shelf availability

Our Rubber Ring Joint pipes are suitable for both irrigation and stormwater use. Available in Class 2, 3 & 4, our Flush Joint pipes are AS405, ISO 9001:2015 and VicRoads compliant. These pipes use a unique rubber ring system to create a strong, lasting seal that you can count on. Civilmart are also able to […]

Our Flush Joint pipes are suitable for heavy-duty stormwater use. Available in Class 2, 3 & 4, our Flush Joint pipes are AS405, ISO 9001:2015 and VicRoads compliant. Elastomeric Bands are available for sealing Flush Joint pipes, ensuring perfect seals in every project. Civilmart are also able to custom-manufacture Flush Joint pipes to your specifications. […]

Our Spigot-Spigot pipes are suitable for installation into our various range of headwalls. Available in Class 2, 3 & 4, our Spigot-Spigot pipes are AS405, ISO 9001:2015 and VicRoads compliant. Civilmart are also able to custom-manufacture Spigot-Spigot pipes to your specifications. Contact your closest Civilmart specialist for more information.

Available in multiple sizes, our Side Entry Pits (SEPs) are perfect for your next street project. Side Entry Pits can be supplied in Class C and can come as a Double Top Unit (DTU) for easier installation. Specialists SEP covers are also available (i.e OKIC, Mt Barker Style, Salisbury style) to suit specific council regulations.

• Upstands designed and manufactured to local council specifications • Class B and Class D available • Easy to install to complete site works with no in-situ concrete required